ELS (edge lock system)
Size 18/22/25/30 use of ELS (edge lock system) for features
●Welding is not necessary and produces an edge!
●For Tooth board pails out of the adaptation!
●Desorption is easy, and trouble is a sectional edge without needing it!
●Desorption is easy, and trouble is a sectional edge without needing it!
●I include the prevention of earth and sand leak function!
●The durability improves in the hard spot by welding it partially!
(please inflect depending on a use)
About a gap between an edge and flat two for 22/25
A gap may occur between an edge and flat two by an adapter kind or a nose point of view and welding mounting location in ELS 22S, 25S. As I cannot accept the cancellation after the cut processing, I would appreciate your ordering it after checking a right note reference image beforehand.
※Please refer to an image image as follows about 18S, the gap of 30S.
Comparison between welding edge and ELS ※The image image is 18S as follows. Specifications are different at other size
Desorption is easy, and the prevention of earth and sand leak function is fulfilling, too
Instructions (the image image is 18S as follows) with ELS usage and the customized article
Depending on the pail [thickness and adapter kind of the pail edge] of the customer, part of flat two may rarely interfere an edge and welding part. In that case, you sharpen an interference part, and please adjust it. ELS is not poor product because of a customized article. In addition, please note that the expenses that a customer was adjusted to become the customer burden. In addition, you accept the cut of flat two in pay in us, but please note that you do not accept the services such as the local arrangement.
The cut dimensions of flat two vary according to size. Please be careful to cut it after prior confirmation as the left note information is for 18S.
Digital catalogue 18S ※The image varies according to size
ELS エッジロックシステム
Adaptation according to the digital document size is within a possible range
ELS ｻｲｽﾞ別適応範囲
Please note that you may change the specifications of the product without a notice for improvement.