Reinforcement type Tooth board wide & pail
With reinforcement type Tooth board wide & pail type
The Tooth board adjusts it to the use scene and can choose a side cutter width "wide type" and a pail width "pail type".
※In the case of a wide pin type, it becomes only the wide type
CAT side pin type
Komatsu side pin type
Reinforcement type Tooth board introduction (ECHIGO TOOTH)
Characteristic of ECHIGO TOOTH
- Because pole ka reduces the gap with the pail, I minimize earth and sand leak.
- I prepare two kinds of wide and the pail type for each class and am available depending on a use.
(but the wide pin type becomes only the wide type)
- It is fitted by the oil pressure shovel of all makers
- Installation, disassembly are easy.
- The exchange in the one piece of article is possible only partly when I am damaged.
- A high-quality product is provided by the thorough inspection system.
- The high durability is realized by materials, the adequacy of the heat-treatment condition.
※The Tooth board made in us is registered a trademark of in "ECHlGO TOOTH".
 Instructions |
(1)The heap dimensions of the Tooth board are necessary more than 10mm in strength.
After checking dimensions list, please choose the appropriate product
After checking dimensions list, please choose the appropriate product
(2)By a pin, abrasion, deterioration of the rubber, Tooth board might fall off. You check it before use, and please change it as needed.
(3)When Adapter is worn remarkably, a wobble occurs even if I attach Tooth board and cannot carry out a normal activity.
In addition, in such a case I recommend Adapter Sten guard and installation that I put it together as it leads to damage, abrasion of Tooth board itself.
In addition, in such a case I recommend Adapter Sten guard and installation that I put it together as it leads to damage, abrasion of Tooth board itself.
| Only as for the wide, <side pin which there are two kinds of wide & pail and puts the two boards together on the use and can choose is> |
Digital catalogue
ツース盤
Please note that you may change the specifications of the product without a notice for improvement.