Conformity, price list of the in cutter
Lineup
Maker | Installation support model (standard pail specifications) | |||||
0.06m3 | 0.08 ... 0.1m3 |
0.2m3 | 0.2m3 | 0.25m3 | 0.4m3 | |
KOMATSU | PC30 | PC40/50 | PC58 | PC78 | PC128 | |
Hitachi Construction Machinery | ZX30 | ZX40/50 | ZX75 | ZX135 | ||
Japanese caterpillar | CAT303 | CAT305 | ||||
Co-Bellco-based plane | SK30 | SK40/50 | SK75 | SK135 | ||
Ken Sumitomo plane | SH75 | SH120 | ||||
KUBOTA-based plane | U20/RX153 | RX303/403 | RX503 | |||
Yanmar-based plane | Vio20/30 | Vio40/50 | B7Σ |
※Please note that the introduction order mentioned above is random order.
■The orange frame becomes only the straight cut product.
■The blue frame can choose a normal article and cut product, but shifts to a straight cut product as soon as stocks disappear.
An In cutter conformity model is detailed ※It is the conformity to each-based plane maker standard pail specification
Price list <) with set price (installation bolt nut>
Model name | The list price (Japanese yen) |
U15/20 RX153/203 | 11,000 |
PC30 SK30 ZX30 RX303/403/503 CAT303 Vio30 |
12,000 |
PC40/50 SK40/50 ZX40/50 CAT305 Vio40/50 |
17,300 |
PC58 | 20,000 |
PC78 SK75 ZX75 B7-Σ |
23,000 |
SK135 | 34,000 |
PC128 ZX135 SH120 | 39,000 |
※The In cutter performs the sale in the one piece of article (body right/left, bolt + nut).
Voice of the visitor using the In cutter
Engineering works construction worker of Niigata |
1.I can dig it neatly until case of Yaita
(a cutter hits Yaita in the pail which a side cutter is attached to)
2.The encroaching to the earth and sand improves and can pile many earth and sand at once (the digging number of times decreases) |
The-based plane maker person in charge of Shimane | 1.As the pail side is worn out when it is work that I take off a side cutter, and cracks enter, it is most suitable for pail side protection. 2.As a result of 1, pail life is prolonged and is reduced the repair. |
◎The table mentioned above is just propriety of the Tooth board for the standard pail. |